Warenkorb ist leer
Waveshare 7 inch 1024*600 Capacitive Touch Screen LCD Display HDMI Interface Custom Raspbian Angstrom Supports Various Systems for All Ver. Raspberry pi Beaglebone Black Banana Pi/Pro Video Photo Kit
B015E8EDYQ
Zum Vergrößern auf das Bild schweben
Expressversand (1-2 Tage)
Zahlung nach Zustellung
unsere Vorteile
HerstellergarantieDie Garantie für alle Produkte in unserem Geschäft beträgt 12 Monate
E-Mail BenachrichtigungSie erhalten E-Mail Nachrichten über den Lieferstatus Ihrer Bestellung.
Rückgabe und Austausch - kein ProblemSie können die gekauften Artikel innerhalb von 14 Tagen zurückgeben. Die Ware muss in normalem Zustand sein und alle Fabrikverpackungen haben.
Verschiedene ZahlungsmethodenBezahlen Sie die Bestellung auf bequeme Weise: Bargeld an den Kurier, per Banküberweisung auf den Empfang der Bank oder per Kreditkarte zum Zeitpunkt der Bestellung.
BestpreisWir sind stolz auf unsere Preise, Hunderte von Kunden überprüfen sie jeden Tag, die eine Wahl zu unserem Online-Shop geben!
Produktbeschreibung
Features 7inch IPS screen, 1024x600 hardware resolution Capacitive touch control Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computersWhen works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free Backlight can be turned off to lower power consumption
Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable BB Black: HDMI cable
PACKAGE CONTENT 7inch HDMI LCD (C) x 1 HDMI cable x 1 USB type A plug to micro B plug cable x 1 RPi screws pack (4pcs) x 1 Quick start sheet x1
FAQ
1.What should we do if there are some red lines on the edge of the screen? Please adjust the config.txt file by adding [hdmi_drive=1] into the end of code After that please power off the srceen and put it aside for a few hours to avoid the flickers
2.What should we do if there are some ghost pictures? Please adjust the adjustable resistor on the back which we point out in the picture And after the screen can display the desktop, rotate the resistor until it can get the best display of desktop Then please leave the screen for a while,waiting for the ghost to disappear (may take several hours)
Development Resources Wiki : www.waveshare.com/wiki/7inch_HDMI_LCD_(C)
Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable BB Black: HDMI cable
PACKAGE CONTENT 7inch HDMI LCD (C) x 1 HDMI cable x 1 USB type A plug to micro B plug cable x 1 RPi screws pack (4pcs) x 1 Quick start sheet x1
FAQ
1.What should we do if there are some red lines on the edge of the screen? Please adjust the config.txt file by adding [hdmi_drive=1] into the end of code After that please power off the srceen and put it aside for a few hours to avoid the flickers
2.What should we do if there are some ghost pictures? Please adjust the adjustable resistor on the back which we point out in the picture And after the screen can display the desktop, rotate the resistor until it can get the best display of desktop Then please leave the screen for a while,waiting for the ghost to disappear (may take several hours)
Development Resources Wiki : www.waveshare.com/wiki/7inch_HDMI_LCD_(C)
Produkteigenschaften
Brand:
Waveshare